ABSTRACT
In this paper an attempt has been made to increase the reliability of engine using Al-SiCp composites as an alternative material for the engine valve guides. Aluminum matrix composites are finding increased application in automotive, aircraft and aerospace industries and hold the greatest promise for the future growth. The finite element analysis of the Al-SiCp composite engine valve guide was done using Ansys software. The temperature, principal stress and principal strain distribution over the entire surfa ....etc

[:=Read Full Message Here=:]

An Integrated Silicon Carbide (SiC) Based Single Phase Rectifier with Power Factor Correction



I. INTRODUCTION
Power supplies are one of the most crucial building
blocks of a modern society, converting high-voltage AC
into low-voltage DC for use in electronic circuitry in office
equipment, telecommunication, and consumer electronics.
Over 2.5 billion AC/DC power supplies are currently in use
in the United States alone, about 6 to 10 billion are in use
worldwide, thus improv ....etc

[:=Read Full Message Here=:]

CHAPTER-1
STRESS TENSOR

INTRODUCTION:
Two planes from infinitesimal distance away and parallel to each other were made to pass through the body, an elementary slice would be isolated. Then, if an additional two pairs of planes were passed normal to the first pair, a cube of infinitesimal dimensions would be isolated from the body. Such a cube is as shown in the Fig.1.1 (a). On the near faces of the cube, i.e., on the faces away from the origin, the directions of stress are positive if they ....etc

[:=Read Full Message Here=:]

Strong Field-Effect in Graphene on SiC



Graphene, consisting of monolayer thick carbon, can be produced as an isolated layer (exfoliated graphite) or as an epitaxial layer on a SiC(0001) surface. We have used the latter method to produce graphene on 4H-SiC by heating at 1300 C in ultra-high vacuum with in-situ monitoring by electron diffraction. The graphene formation is performed at CMU, while transistor fabrication (with 1.5x0.5 mm2 channel area) is performed at Sarnoff Corp. A ....etc

[:=Read Full Message Here=:]

good to read and information regarding this subject is so good and understandable manner ....etc

[:=Read Full Message Here=:]

A Scalable SIC Device for DC/DC Converters in Future Hybrid Electric Vehicles


2)INTRODUCTION
This work is motivated by an industry wide interest to integrate SiC power devices in future automotive applications. The need to mount electric motor drives and other power converter electronics under the hood and as close to the motor as possible demands that the power electronics installed must either be capable of enduring the high under-hood temperatures or incorporate an extra coolin ....etc

[:=Read Full Message Here=:]

i need information regarding car wheel rim analysis and modeling ....etc

[:=Read Full Message Here=:]

I want to make a FEM project for this semester and hence I want complete procedure of Analysis of Gear . Other topics are also requested.Also tell the difficulty level in doing each project. Thank You!! ....etc

[:=Read Full Message Here=:]

Sir, what is the syllabus of 1st year bsc maths of cbcss syllabus model 1 of mg university 2015?
What are the best guide for bsc maths of cbcss syllabus model 1 of mg university? ....etc

[:=Read Full Message Here=:]

please send project report of neural network based handwritten character recognition without feature extraction ....etc

[:=Read Full Message Here=:]