STUDIES ON ECONOMICAL CONFIGURATION OF RCC AND PRESTRESSED SHELL ROOFS

Presented by
R.Gopi

Under the guidance of Dr.N.Arunachalam.,B.E(Hons.,), MSc(Engg.,),Ph.D Dean of Civil Engg,
Bannari Amman Institute of Technology


AIM s

1. To identify the configuration of different directrices of Prestressed cylindrical shell roofs that will result in the least cost for a given load and span.
2. To identify the configuration of different directrices of RC Conoidal shell roofs that will result in th ....etc

[:=Read Full Message Here=:]

Pin configuration of 8085 and 8086 Microprocessors


8085 PIN DESCRIPTION
Some important pins are :
AD0-AD7: Multiplexed Address and data lines.
A8-A15: Tri-stated higher order address lines.
ALE: Address latch enable is an output signal. It goes high when operation is started by processor .
S0,S1: These are the status signals used to indicate type of operation.
RD : Read is active low input signal used to read data from I/O device or memory.
WR :Write is an acti ....etc

[:=Read Full Message Here=:]

Dear Whom,

kindly please let me know about the z configuration PID and also the other kind of configurations. As I know there is two more cofigurations Paralel and Serial.
In addition I need to know more about the meterings skids which have just one meter.

Regards
Azade Qasemi
....etc

[:=Read Full Message Here=:]

Presented By:
Mohamed Amer, Qamar Nazir
Project Report for Information Security Course
Link pings universitetet, Sweden
Abstract
Firewall is one of the important security software that protects your system from other network. Well configured firewall gives confidence to the administrator that his system is protected from malicious attacks. Realizing good firewall configuration is a matter of testing. In this project paper we will configure and test a firewall, and discover how costly can the testing proce ....etc

[:=Read Full Message Here=:]

to get information about the topic multiple routing configuration for fast ip network recovery related topic refer the page link bellow

http://seminarsprojects.net/Thread-multiple-routing-configuration-for-fast-ip-network-recovery?pid=14134 ....etc

[:=Read Full Message Here=:]

Multiple Routing Configurations for Fast
IP Network Recovery


Abstract:

As the Internet takes an increasingly central role in our communications infrastructure, the slow convergence of routing protocols after a network failure becomes a growing problem. To assure fast recovery from page link and node failures in IP networks, we present a new recovery scheme called Multiple Routing Configurations (MRC). We also show how an estimate of the traffic demands in the network can be used to improve the distribution of the recovered traf ....etc

[:=Read Full Message Here=:]

Intel 8086 architecture



Today we ll take a look at Intel s 8086, which is one of the oldest and yet
most prevalent processor architectures around.
We ll make many comparisons between the MIPS and 8086 architectures,
focusing on registers, instruction operands, memory and addressing
modes, branches, function calls and instruction formats.
This will be a good chance to review the MIPS architecture as well.

An x86 processor timeline
1971: Intel s 4004 was the first mi ....etc

[:=Read Full Message Here=:]

Intel 8086



Features of 8086 Microprocessor

1) 8086 has 16-bit ALU; this means 16-bit numbers are directly processed by 8086.
2) It has 16-bit data bus, so it can read data or write data to memory or I/O ports either 16 bits or 8 bits at a time.
3) It has 20 address lines, so it can address up to 220 i.e. 1048576 = 1Mbytes of memory (words i.e. 16 bit numbers are stored in consecutive memorylocations). Due to the 1Mbytes memory size multiprogramming is made feasible as well a ....etc

[:=Read Full Message Here=:]

plz send the material about self configuration and auto configuration thomas krag ppt ....etc

[:=Read Full Message Here=:]

blue tooth configuration of an FPGA:an application to modular robotics


Introduction

Self-reconfigurable modular robotics represents a new approach to robotic hardware.
Instead of designing a new and different mechanical robot for each task, a generic robot is composed of many simple, identical, interacting and possibly lowpriced modules. The versatility of the robot emerges from the connection of all its components. Furthermore, given some mechanical abilities, a modular robot can even modify the position of its c ....etc

[:=Read Full Message Here=:]