1. INTRODUCTION

Computer chips of today are synchronous. They contain a main clock, which controls the timing of the entire chips. There are problems, however, involved with these clocked designs that are common today.

One problem is speed. A chip can only work as fast as its slowest component. Therefore, if one part of the chip is especially slow, the other parts of the chip are forced to sit idle. This wasted computed time is obviously detrimental to the speed of the chip.

....etc

[:=Read Full Message Here=:]

ABSTRACT
The topic I am going to present in this seminar is Skid Steer Loader and Multiterrain Loader. I have included relevant information on different types of loaders like, Crawler and Wheel Loader, their operation and classification uses as well as their advantages and disadvantages. I hope my seminar on this topic throws light on necessary information regarding different type of loader.

Chapter I
INTRODUCTION
Skid-steer loaders began catching on in the construction field in the 1980s because they offered contrac ....etc

[:=Read Full Message Here=:]

Submitted to:
Mr. DEEPAK SOOD

[Submitted by:
PRADEEP(1407234)
SHRI KRISHAN DEV BHOOMI INSTITUTE OF ENGINEERING & TECHNOLOGY


History of Microstrip Patch Antenna
The rapid development of microstrip antenna technology began in the late 1970s. By the early 1980s basic microstrip antenna elements and arrays were fairly well established in terms of design and modeling, and workers were turning their attentions to improving antenna performance features (e.g. bandwidth), and to the increased a ....etc

[:=Read Full Message Here=:]

Mobile Sampling of Sensor Field Data Using Controlled Broadcast

ABSTRACT:
Mobile objects can be used to gather samples from a sensor field. Civilian vehicles or even human beings equipped with proper wireless communication devices can be used as mobile sinks that retrieve sensor-data from sampling points within a large sensor field. A key challenge is how to gather the sensor data in a manner that is energy efficient with respect to the sensor nodes that serve as sources of the sensor data. In this paper, an alg ....etc

[:=Read Full Message Here=:]

Bucket-wheel excavators (BWEs) are heavy equipment used in surface mining.

The primary function of BWEs is to act as a continuous digging machine in large-scale open-pit mining operations. What sets BWEs apart from other large-scale mining equipment, such as bucket chain excavators, is their use of a large wheel consisting of a continuous pattern of buckets used to scoop material as the wheel turns. They are among the largest vehicles ever constructed, and the biggest bucket-wheel excavator ever built, Bagger 293, is the largest terrestrial ....etc

[:=Read Full Message Here=:]

about bucket sort animation example in to the right box for getting free material ....etc

[:=Read Full Message Here=:]

Concept of Cement

The word CEMENT may be defined as a substance, which can join two or more pieces of same other substance together to form a unit mass. Cement is a fine powder which when mixed with water and allow to set and harder can join different components together to give a strong structure mechanically. Thus cement can be used as founding material for bricks or for founding solid particles of different sizes (rubble masonry ) to form a monolish.
It was about 150 years ago or so that Cement as we k ....etc

[:=Read Full Message Here=:]

TESTING AND PERFORMANCE EVALUATION OF AN IMPORTED MOBILE BUCKET MILKING MACHINE FOR WATER BUFFALOES

Jandool Khan
Farm Machinery Institute, National Agricultural Research Centre, Islamabad, Pakistan

ABSTRACT
An imported mobile bucket milking machine was used for milking water buffaloes. The experiment was conducted at Livestock Research Station (LRS), National Agricultural Research Centre, Islamabad. A herd of 12 animals (water buffaloes) were milked for more than one year. Machine milking of buffaloes wa ....etc

[:=Read Full Message Here=:]

A COMPARATIVE STUDY OF CONVENTIONAL AND METAMATERIAL-BASED
PLANAR LEAKY-WAVE ANTENNAS FOR DIRECTIVE RADIATION AT BROADSIDE

(2) La Sapienza University of Rome, Electronic Engineering Dept. - Via Eudossiana 18, 00184 Roma, Italy.

(3) University of Siena, Information Engineering Dept. Via Roma 56, 53100 Siena, Italy.

(4) University of Houston, Electronic and Computer Engineering Dept. - Houston, Texas, 77204-4005 USA.

Abstract:

In this work, one-dimensional and two-dimensional leaky-wave antennas ba ....etc

[:=Read Full Message Here=:]

Chapter 1
INTRODUCTION TO WEB SPAM

Web spamming refers to actions intended to mislead search engines and give some pages higher ranking than they deserve. Recently, the amount of web spam has increased dramatically, leading to a degradation of search results.

Today, more and more people rely on the wealth of information available on the World Wide Web, and thus, increased exposure on the web may yield significant financial gains for organizations. Often, search engines are the entryways to the web. That is w ....etc

[:=Read Full Message Here=:]

hey;
I am huzaifa tinwala. 7 sem mechanical eng.
I need ur help in making a mini refrigerator vapour based system .
i have collected a little information of the same .I need ur help in the fabrication part ..
so plz reply as soon as possible

here is the data i have collected
Design and Fabrication of Domestic Refrigeration Unit
Abstract
The object of the project is to design, fabricate and assemble an economically priced '' domestic refrigeration unit'' having, aesthetic look efficient and small in size.
This unit is unique in the ....etc

[:=Read Full Message Here=:]

1. FEASIBILITY STUDY FOR RURAL INDUSTRIES IN KUNIKAL TALUK

2. PERISTALTIC PUMP SPRAYER

3. LOW SPEED WIND TUNNEL

4. CHARCOAL COOLER

5. ENGINEERING STUDY OF TRADITIONAL INDUSTRIES

6. MANUFACTURE OF CEMENT FROM RICE HUSK ASH

7. DESING AND FABRICATION OF A HYDRAULIC RAM FOR PUMPING WATER

8. TOOLING FOR DEEP WELL HAND PUMP REPAIR

9. FABRICATION OF BIO- GAS BURNER FOR COOKING

10. DESING AND FABRICATION OF A CHAFF CUTTER

11. SOLAR STILL

12. FABRICATION OF A HAND OPERATED RICE POLISHER

13. TRADITIONAL WATER LIFTING DEVICES

14. ....etc

[:=Read Full Message Here=:]

EJECTION SEAT



ABSTRACT
Almost since the first days of flight man has been concerned with the safe escape from an aircraft which was no longer flyable. Early escape equipment consisted of a recovery parachute only. As aircraft performance rapidly increased during World War II, it became necessary to assist the crewmen in gaining clear safe separation from the aircraft. This was accomplished with an ejector seat which was powered by a propellant driven catapult - the first use of a propulsive elemen ....etc

[:=Read Full Message Here=:]

A COMPARATIVE STUDY OF CONVENTIONAL AND METAMATERIAL-BASED
PLANAR LEAKY-WAVE ANTENNAS FOR DIRECTIVE RADIATION AT BROADSIDE

(2) La Sapienza University of Rome, Electronic Engineering Dept. - Via Eudossiana 18, 00184 Roma, Italy.

(3) University of Siena, Information Engineering Dept. Via Roma 56, 53100 Siena, Italy.

(4) University of Houston, Electronic and Computer Engineering Dept. - Houston, Texas, 77204-4005 USA.

Abstract:

In this work, one-dimensional and two-dimensional leaky-wave antennas ba ....etc

[:=Read Full Message Here=:]

Bucket-wheel excavators (BWEs) are heavy equipment used in surface mining.

The primary function of BWEs is to act as a continuous digging machine in large-scale open-pit mining operations. What sets BWEs apart from other large-scale mining equipment, such as bucket chain excavators, is their use of a large wheel consisting of a continuous pattern of buckets used to scoop material as the wheel turns. They are among the largest vehicles ever constructed, and the biggest bucket-wheel excavator ever built, Bagger 293, is the largest terrestrial ....etc

[:=Read Full Message Here=:]