INTRODUCTION
This Project Grid solving Robot is based on 8 bit Microcontroller AT89S52.
This Robot follows the black line which is drawn over the white surface or it
follows the white line which is drawn over the black surface. The sensors
are used to sense the line. When the light signal falls on the white surface, it
gets reflected and if it falls on the black surface, it is not reflected, this
principle is used to scan the Lines for the Robot. All the above systems are
controlled by the Microcontroller. In o ....etc

[:=Read Full Message Here=:]

please send the matlab code for economic load dispatch using ant colony search algorithm. ....etc

[:=Read Full Message Here=:]

Line Maze Robot

ABSTRACT

Line Maze Robot is a machine that can follow a path, the paths are lines. The color of the lines are black and the ground is white. So, at first, the robot must have an ability to follow the lines. Lines are 2cm width. Of course there will be + and T intersections in the maze. The problem is to solve these intersections and to overcome any unexpected blocks in the path. There may also a problem of the robot selecting the same path every time, and this might cause the robot not to f ....etc

[:=Read Full Message Here=:]

Problem Solving

INTRODUCTION TO PROBLEM SOLVING

Engineers must analyze and solve a wide range of technical problems. Some will be reasonably simple single-solution problems. Others will be open-ended and will likely require a team of engineers from several disciplines. Some problems may have no clear solution.


PROBLEM SOLVING INVOLVES:
EXPERIENCE
KNOWLEDGE
PROCESS
ART
FOCUS: Computer Assisted Problem Solving
Computers are good tools for solving rule-based problems using deci ....etc

[:=Read Full Message Here=:]

hi please help me I need maze solving robot source code. ....etc

[:=Read Full Message Here=:]

The micromouse is very much important in the field of robotics as it requires a complete analysis & proper planning to be solved. For solving the maze, several algorithms are discussed. very basic wall follower logic is first discussed followed by some sophisticated level such as the flood fill.

The Wall Follower Logic
Maze Interpretation
The maze consists of a 16x16 array of 18cmx18cm square. The micromouse has to reach the centre cell, which is the destination of the robot. the entire
maze has to be traversed by the robo ....etc

[:=Read Full Message Here=:]

This is my maze solving robot project which worked out pretty well. I have put up my whole project report that i submitted to my college but i have chucked out the exact code. if i get a good response and demans then i will surely give you all the exact working code of my project.If you are interested only to learn about the algorithm and not worried about the design pl skip to the section 5 of this text.

1 INTRODUCTION

Atonomous robots have wide reaching applications.From Bomb sniffing to finding humans in wreckage to home automation.Major p ....etc

[:=Read Full Message Here=:]

Sir

I have seen the abstract of the project which matches with my projects but only few topics are there in the page can you give me the whole project on 'Transient stability analysis of single machine system' using runge kutta 4th order method using matlab code

regards
digg_777 ....etc

[:=Read Full Message Here=:]

This project is aimed at analyzing the available methods for solving a system of linear equations of the form n x n. Using a couple of iterative and/or direct methods, implement a program for these methods that could be run on a parallel
processor. At the end, a graph can be plotted with time taken for execution of a method considered V/s number of processors used (2, 4, 8, 32). For example following questions need to be addressed
1. For a method considered, evaluate that as the number of processors is increased does the time taken necessar ....etc

[:=Read Full Message Here=:]

respected sir,
I want to build a mini robot having a bulldozer arm controlled by joystick for taking part in robot wars in our college..sir i want ckt diag bcs i want to implement by myself..
sir, I want to build a mini robot having a bulldozer arm controlled by joystick for taking part in robo wars in our college..sir i want the ckt diag bcs i want to implement myself..my email id is:[email protected] am eagerly waiting for ur rply.. ....etc

[:=Read Full Message Here=:]