WATER MIST SYSTEM POSSIBILITIES AND FEASIBILITY
FOR PROTECTION OF OIL AND GAS INSTALLATION
RAKESH KUMAR RATNAGAR
FIRE OFFICER
ONGC ANKLESHWAR, GUJARAT
Email [email protected]
Depending on system design pressure, water
mist system classified into three categories
a) Low pressure water mist system: where
the pressure encountered by the system is
175 psi or less, the same pressure range
used for most of standard water spray
system
b) Intermediate
pressure
water
mist
system: where the pressure encountered
by the system is ....etc

[:=Read Full Message Here=:]

I require the cylinder lubrication
Regards
Vijay Maske ....etc

[:=Read Full Message Here=:]

Respected sir,
I want to do the project on Minimum Quantity Lubrication for that purpose i required referances (litreture)for the synopsis.Pls consider my needyness & help to me.

Thanks & Regards
Pravin Patil
[email protected]
for project i want data on minimum quantity lubrication,Pls send for needy. ....etc

[:=Read Full Message Here=:]

what is the purpose of control oil in lub oil system of fd fan ....etc

[:=Read Full Message Here=:]

To get full information or details of oil mist lubrication system please have a look on the pages

http://seminarsprojects.net/Thread-oil-mist-lubrication

http://seminarsprojects.net/Thread-lubrication-systems

if you again feel trouble on oil mist lubrication system please reply in that page and ask specific fields in oil mist lubrication system ....etc

[:=Read Full Message Here=:]

HISTORY

The Oil Mist principle was developed by a bearing manufacturer in Europe during the 1930s. The problem that nurtured this development was the inability to satisfactorily lubricate high-speed spindle bearings on grinders and similar equipment. In 1948, oil mist was brought to the United States in the steel industry. Since'the late 1950% oil mist has been servicing rotating equipment 'in the refining industry. The first use of oil mist in the petrochemical industry ....etc

[:=Read Full Message Here=:]

Canister purge valve

A purge valve for an evaporative emission control system. The purge valve includes an actuator, a valve body, and a valve closure member disposed in the valve body. The actuator is disposed along a longitudinal axis, and includes an electromagnetic coil having a hollow core extending along the longitudinal axis, a stator disposed in the hollow core, and a permanent magnet armature disposed proximate the stator. The valve body is disposed proximate the actuator, and defines a flow passage extending along the longitudinal ax ....etc

[:=Read Full Message Here=:]

Touch screen operated industrial oil dispensing system (OIL SCADA)
The project aims in designing a system which is capable of dispensing required
amount of oil given by the user through touch screen. This system also provides the
security of accessing through password enabled feature. Liquid dispensing systems are
quite commonly found in our daily life in different places like offices, Bus stands,
Railway stations, Petrol pumps. Here we are going to present modern era liquid
dispensing system which is meant to be operated with touch screen inte ....etc

[:=Read Full Message Here=:]

ABSTRACT
Metal cutting fluids changes the performance of machining operations because of their lubrication, cooling, and chip flushing functions. Typically, in the machining of hardened steel materials, no cutting fluid is applied in the interest of low cutting forces and low environmental impacts. Minimum quantity lubrication (MQL) presents itself as a viable alternative for hard machining with respect to tool wear, heat dissertation, and machined surface quality. This study compares the mechanical performance of mini ....etc

[:=Read Full Message Here=:]

DEVELOPMENT OF ELECTROSTATIC SOLID LUBRICATION SYSTEM FOR IMPROVEMENT IN MACHINING PROCESS PERFOMANCE

Submitted by
JAYAKRISHNAN R




Abstract

Liquid lubricants have traditionally been used to control the high heat generation in machining; however, the use of cutting fluid has become more problematic in terms of both employee health and environmental pollution. Minimization or possible elimination of cutting fluids substituting their functions by some other means is emergi ....etc

[:=Read Full Message Here=:]