INTRODUCTION
As the world is advancing forth technically in the field of space research, missile and nuclear industry; very complicated and precise components having some special requirements are demanded by these industries. For meeting these challenges unconventional methods of machining have evolved. The unconventional methods of machining have several specific advantages over conventional methods of machining and these promise formidable tasks to be undertaken and set a new record in the manufacturi ....etc

[:=Read Full Message Here=:]

Determination of Optimum Process Parameters during turning of AISI 304



Introduction and literature survey

In machining process, Surface finish is one of the most significant technical requirements of the customer. A reasonably good surface finish is desired to improve the tribological properties, fatigue strength, corrosion resistance and aesthetic appeal of the product. Nowadays, manufacturing industries specially concerned to dimensional accuracy and surface finish. In order to obtain optimal cutting pa ....etc

[:=Read Full Message Here=:]

PROJECT GUIDE :
Dr.K.RAMANATHAN

Presented by:
K.KARTHIKEYAN




Abstract

Titanium nitride (TiN) is an extremely hard ceramic material, often used as a coating on titanium alloys, steel, carbide, and aluminium components to improve the substrate's surface properties.

Applied as a thin coating, TiN is used to harden and protect cutting and sliding surfaces, for decorative purposes (due to its gold appearance), and as a non-toxic exterior for medical implants.

TiN coating is for edge retention and corrosion r ....etc

[:=Read Full Message Here=:]

to get information about the topic cutting parameters of turning full report ppt and related topic rfer the page link bellow

http://seminarsprojects.net/Thread-optimization-of-machining-parameters-in-cnc-turning-of-martensitic-stainless-steel

http://seminarsprojects.net/Thread-investigation-of-cutting-parameters-of-surface-roughness-for-a-non-ferrous-material

http://seminarsprojects.net/Thread-cutting-parameters-optimization-for-the-wire-edm-process-using-continuous-ants-colo

http://seminarsprojects.net/Thread-optimization-of-mach ....etc

[:=Read Full Message Here=:]

ABSTRACT

This paper describes in detail, field experiments performed on a single-phase, distribution transformer to study the behavior of transformer terminal parameters during internal winding faults. A custom-built transformer provided with external taps was used for these tests. The taps were used to stage various internal winding faults in the transformer. Terminal values of voltages and currents were monitored and the results presented. A comparison of these results with simulation results is also presented


Presented By:
Palme ....etc

[:=Read Full Message Here=:]

please send all material of that project in pdf file at that email -chandrakant.mahto9199@gmail
please send me data of that projet thankyou ....etc

[:=Read Full Message Here=:]

to get information about the topic cutting parameters in cnc turning using full factorial method related topic rfer the page link bellow

http://seminarsprojects.net/Thread-optimization-of-machining-parameters-in-cnc-turning-of-martensitic-stainless-steel

http://seminarsprojects.net/Thread-investigation-of-cutting-parameters-of-surface-roughness-for-a-non-ferrous-material

http://seminarsprojects.net/Thread-cutting-parameters-optimization-for-the-wire-edm-process-using-continuous-ants-colo

http://seminarsprojects.net/Thread-optimization-of ....etc

[:=Read Full Message Here=:]

To get full information or details of taguchi method advantages and disadvantages ppt please have a look on the pages

http://seminarsprojects.net/Thread-genichi-taguchi?pid=8975

if you again feel trouble on taguchi method advantages and disadvantages ppt please reply in that page and ask specific fields in taguchi method advantages and disadvantages ppt ....etc

[:=Read Full Message Here=:]

to get information about the topic cutting parameters using taguchi method full report ppt and related topic refer the page link bellow

http://seminarsprojects.net/Thread-cutting-parameters-optimization-for-the-wire-edm-process-using-continuous-ants-colo ....etc

[:=Read Full Message Here=:]

taguchi method software for l9 free download

INTRODUCTION TO TAGUCHI METHOD :
--

Every experimenter has to plan and conduct experiments to obtain enough and relevant data so that he can infer the science behind the observed phenomenon. He can do so by,

(1) trial-and-error approach :
--

By performing a series of experiments each of which gives him someunderstanding. This requires making measurements after every expt.so that analysis of observed data will allow him to decide what to do next - Which parameters should be varied and by how ....etc

[:=Read Full Message Here=:]