panic alarm

A panic alarm is an electronic device designed to assist in alerting somebody in emergency situations where a threat to persons or property exists.
A panic alarm is frequently but not always controlled by a concealed panic alarm button. These buttons can be connected to a monitoring center or locally via a silent alarm or an audible bell/siren. The alarm can be used to request emergency assistance from local security, police or emergency services. Some systems can also activate closed-circuit television to record or assess the e ....etc

[:=Read Full Message Here=:]

Many fire alarm circuits are presented here,but this time a new circuit using a thermistor and a timer to do the trick. The circuit is as simple and straight forward so that, it can be easily implemented. The thermistor offers a low resistance at high temperature and high resistance at low temperature. This phenomenon is employed here for sensing the fire.

The IC1 (NE555) is configured as a free running oscillator at audio frequency. The transistors T1 and T2 drive IC1. The output (pin 3) of IC1 is couples to base of transistor T3 (SL100), w ....etc

[:=Read Full Message Here=:]

simple touch alarm circuit using ic 555 ppt

Touch the sensor of the alarm with your finger and it starts beeping, goes on for some time and then stops. Touching it again, and it goes again! This little and flexible circuit consists of a touch sensor and a directly coupled transistor amplifier with a small loudspeaker as the output load. Two sensor strips of metal are mounted side by side on a 1 1 cm size micasheet and connected to the input of the circuit.

How the touch alarm works

Under normal conditions no current flows through switching ....etc

[:=Read Full Message Here=:]

project file content needed for FIRE ALARM CIRCUIT

Working of fire alarm circuit
Working is based on the switching property of transistor.
The thermistor and R1 forms a potential divider network which drives the transistor.
The heart of this circuit is a thermistor. Thermistors are low-cost, easily-available temperature sensors widely used for uncomplicated temperature measurements.
Thermistors are temperature sensitive resistors. When temperature increases resistance offered by the thermistor decreases and vice versa. At normal temperature, t ....etc

[:=Read Full Message Here=:]

In the past, hardwired alarm systems are the only choice for customers who need security equipment to protect premises. Today, with rapid technology evolve, many users shift from hardwired alarm to wireless alarm. It seems home security industry is moving from hardwired to wireless, but as one of mature and stable alarm equipment, some users still favor the hard wired alarm system. In this article, we will show you some basic information about advantages and disadvantages of hardwired alarm systems.

What s hardwired alarm system ?

Alarm ....etc

[:=Read Full Message Here=:]

modified circuit diag of anti sleep alarm for student
WE WANT MODIFIED CIRCUIT DIAGRAM FOR ANTI SLEEP ALARM FOR STUDENTS. ....etc

[:=Read Full Message Here=:]

high low volt cut off with delay alarm circuit ppt for pdf

Abstract

This straight forward circuit will protect electrical appliances from over voltage as well as under voltage. The circuit also produces an alarm when the power supply comes back. An ideal circuit for home to protect your valuable equipments from voltage fluctuations. The same circuit with some modifications can be used to make a automatic voltage stabilizer.

When the mains voltage is in the normal level, the voltage at the negative terminal of zener diode D4 will be less tha ....etc

[:=Read Full Message Here=:]

project about tank water level indicator with overflow alarm circuit ppt in to the right box for getting free material and support from us/dedicated premium members.. ....etc

[:=Read Full Message Here=:]

Simple Fire Alarm Circuit
Here is a simple fire alarm circuit based on a LDR and lamp pair for sensing the fire.The alarm works by sensing the smoke produced during fire.The circuit produces an audible alarm when the fire breaks out with smoke.
When there is no smoke the light from the bulb will be directly falling on the LDR.The LDR resistance will be low and so the voltage across it (below .6V).The transistor will be OFF and nothing happens.When there is sufficient smoke to mask the light from falling on LDR, the ....etc

[:=Read Full Message Here=:]

A panic alarm is an electronic device designed to assist in alerting somebody in emergency situations where a threat to persons or property exists.

A panic alarm is frequently but not always controlled by a concealed panic alarm button. These buttons can be connected to a monitoring center or locally via a silent alarm or an audible bell/siren. The alarm can be used to request emergency assistance from local security, police or emergency services. Some systems can also activate closed-circuit television to record or assess the event.

M ....etc

[:=Read Full Message Here=:]