Abstract:
This project is very useful for long journey vehicle and this setup helps to rise vehicle by using battery or engine power . An automatic pneumatic-hydraulic jack comprises a mini air compressor and automatic hydraulic jack to serve as an on-vehicle tool where as the power of the battery on the vehicle is used to drive the mini air compressor which compresses air to serve as its primary force. The air enters an entry channel from an air inlet nozzle and passes to an air chamber via a changeover valve to push a small air-oil pi ....etc

[:=Read Full Message Here=:]

seminor about seminar topics in hydraulic and pneumatic control systems in to the right box for getting free material and support from us/dedicated premium members.. ....etc

[:=Read Full Message Here=:]

SMS BASED AUTOMATIC PNEUMATIC PUNCHING AND RIVETING MACHINE

The pneumatic system has gained a large amount of importance in last few decades. This importance is due to its accuracy and cost. This convenience in operating the pneumatic system has made us to design and fabricate this unit as our project. This unit, as we hope that it can be operated easily with semi skilled operators. The pneumatic press tool has an advantage of working in low pressure, that is even a pressure of 6 bar is enough for operating the unit. The pressurized air passin ....etc

[:=Read Full Message Here=:]

Excavators are heavy construction equipment consisting of a boom, stick, bucket and cab on a rotating platform known as the house. The house sits atop an undercarriage with tracks or wheels. A cable-operated excavator uses winches and steel ropes to accomplish the movements. They are a natural progression from the steam shovels and often called power shovels. All movement and functions of a hydraulic excavator are accomplished through the use of hydraulic fluid, with hydraulic cylinders and hydraulic motors.
Due to the linear actuation of hy ....etc

[:=Read Full Message Here=:]

MAIN PURPOSE:

The hydraulic jack is a device, which is used to lift heavy loads by applying a lot of small force. It is based on the PASCAL LAW, which states that the pressure intensity is equally transmitted in all directions through a mass of liquid in res

ITS PRINCIPLE OF MAIN OPERATION:

The operating principle of a hydraulic jack can be explained with the aid of the figure, some different parts are considered as a plunger and piston, operating on two cylinders of different diameter, which are interconnected at the b ....etc

[:=Read Full Message Here=:]

Abstract Computational Private Information Retrieval (cPIR) protocols allow a client to retrieve one bit from a database, without the server inferring any information about the queried bit. These protocols are too costly in practice because they invoke complex arithmetic operations for every bit of the database. In this paper, we present pCloud, a distributed system that constitutes the first attempt toward practical cPIR. Our approach assumes a disk-based architecture that retrieves one page with a single query. Using a striping technique, we ....etc

[:=Read Full Message Here=:]

i want report of automatic pneumatic water pumping system ....etc

[:=Read Full Message Here=:]

a) Combined hydraulic and disk break system
b) Automatic paint spraying Equipment
c) Automatic pneumatic vice and jack
d) Fabrication of Hydraulic oil pump testing Equipment
e) Fabrication of Hydraulic Break show Riveting Machine
f) Fabrication of mirror cutting machine by using compressed air
g) Auto Indexing gear cutting attachment for pneumatic shaping Machine
h) Fabrication of Hydraulic Ladder
i) Highways high speed indication and Automatic Pneumatic Braking System
j) Remote controlled paint spraying Robot
k) Quick Lifti ....etc

[:=Read Full Message Here=:]

Since 1945 Parker Autoclave Engineers has designed and built premium quality valves, fittings and tubing. Parker Autoclave Engineers ball valve actuators can be supplied with a variety of features and options. Operators are supplied either pneumatic or electric actuated.
FEATURES
Use for remote and automatic operation.

Air-to-open/spring-to-close and air to open and close.

Limit switches or limit switches with visual indicators available.

High temperature options.

Stainless steel housings for corrosive applications.

Manual ove ....etc

[:=Read Full Message Here=:]

1. Automatic Pneumatic Paper cup folding Machine
2. Fabrication of Pneumatic automatic Vegetable Cutting Machine
3. Auto Indexing gear cutting attachment for pneumatic shaping Machine
4. Fabrication of Hydraulic Pressure Testing Pump
5. Automatic Electro-Hydraulic Braking System for Four Wheeler
6. Fabrication of Hydraulic oil pump testing Equipment
7. Fabrication of mirror cutting machine by using compressed air
8. Automatic Pneumatic Cold Chamber Die Casting Machine
9. Fabrication of three axis pneumatic Modern Trailer
10. C ....etc

[:=Read Full Message Here=:]