White light on light-emitting diodes (LED) as a substitute for HID lamps in street lighting system, to include the dimming function. 8051 microcontroller family is used to control the intensity, developing a pulse-width modulated signals that triggers the MOSFET for switching LEDs accordingly to achieve the desired operation.

In this system, mainly covering roads is carried out through the discharge lamps (HID), the energy of which consumption is high. Its intensity may not be managed in accordance with the requirement there is therefore a nee ....etc

[:=Read Full Message Here=:]

Typical middle-income households spend Rs300 to Rs500 per month on electricity - 800 to 1000 kilowatt-hours (kWh). Most homes could save between 20 and 30% of this easily if we can use efficient equipment and even more we can save if we can use outdoor sunlight for lightening. In this project we have planned to develop an automatic shutter control system in accordance with outdoor sunlight to save electricity. Whenever there is sunlight outside, the blinds open to use that light avoiding the need for electric lights. The opening angle of the bl ....etc

[:=Read Full Message Here=:]

c code for vehicle detection and intensity control of street light

Basic purpose of this project is to make street lights intelligent so that it can turn it on and off itself. Another feature of this project is that street lights intensity vary according to intensity of light and number of vehicles on road. Followings are the main features of this project :

Street lights turns itself on automatically during night or darkness. They turn themself off automatically during day time and during visible intensity of light.
Street lights controls its ....etc

[:=Read Full Message Here=:]

To get full information or details of automatic intensity control street light please have a look on the pages

http://seminarsprojects.net/Thread-automatic-vehicle-intensity-street-light-controller

if you again feel trouble on automatic intensity control street light please reply in that page and ask specific fields in automatic intensity control street light ....etc

[:=Read Full Message Here=:]

automatic room light controller with bidirectional visitor counterautomatic room light control system

Often we see visitor counters at stadium, mall, offices, class rooms etc. How they count the people and turn ON or OFF the light when nobody is inside? Today we are here with automatic room light controller project with bidirectional visitor counter by using Arduino Uno. It is very interesting project for hobbyists and students for fun as well as learning.

Components

Arduino UNO
Relay (5v)
Resisters
IR Sensor module
16x2 LCD display
Bread B ....etc

[:=Read Full Message Here=:]

In the current system, maximum lightning over the freeways is completed through HID (High Intensity Discharge lamps), the energy utilization of HID lamps/lanterns are high. The intensity of HID lamps cannot be controlled, in harmony to the necessity, therefore there is a requirement to swap to a substitute way of illumination system i.e., by making use of LEDs. This lighting system is constructed to conquer the disadvantages of High Intensity Discharge lamps.

This lightning system exhibits the utilization of the Light emitting diodes or LED ....etc

[:=Read Full Message Here=:]

White Light Emitting Diode (LED) replaces HID lamps in street lighting system to include dimming feature. A microcontroller of 8051 family is used to control the intensity by developing pulse width modulated signals that drives a MOSFET to switch the LEDs accordingly to achieve desired operation.

In the present system, mostly the lighting up of highways is done through High Intensity Discharge lamps (HID), whose energy consumption is high. Its intensity cannot be controlled according to the requirement so there is a need to switch on to an alt ....etc

[:=Read Full Message Here=:]

source code for automatic street light intensity control

Street lights are controlled manually in olden days. These days automation of street lights has emerged. But one can observe that there is no need of high intensity in peak hours i.e. when there is no traffic and even in early mornings. By reducing the intensity in these times, energy can be saved to some extent. We have already published a post about Automatic Street Light Controller circuit which was designed using Relays and LDRs. This article explains the circuit that automatically c ....etc

[:=Read Full Message Here=:]

actually m doing research on the security and ethics of Automatic room light intensity detection and controlling .. please help me out

actually m doing research on the security and ethics of Automatic room light intensity detection and controlling .. please help me out




actually m doing research on the security and ethics of Automatic room light intensity detection and controlling .. please help me out ....etc

[:=Read Full Message Here=:]

sir
i am avinash giri a final year student of electronics and comm. branch..
I need a complete project report on AUTOMATIC STREET LIGHT INTENSITY CONTROL BASED ON VEHICLE MOVEMENT IN HIGHWAYS..


thanking you
avinash giri ....etc

[:=Read Full Message Here=:]