A quick overview on rotatory Brush and Brushless DC Motors



INTRODUCTION
The electric motor in its simplest terms is a converter of electrical energy to useful mechanical energy. It operates on the principle that two magnetic fields within certain prescribed areas react upon each other. One field is produced by a permanent magnet assembly while the other field is produced by an electrical current flowing in the motor windings. These two fields result in a torque which tends to ro ....etc

[:=Read Full Message Here=:]

PRODUCTIVITY IMPROVEMENT ON COPY TURNING MACHINE, THROUGH CYCLE TIME REDUCTION
OUR ACHIEVEMENTS
We reduced the cycle time required for a valve on
CT machine from 24 seconds to 22 seconds.
The reduction of 2 seconds in the cycle time has
resulted in following changes.
Monthly turnover increased by Rs 5,62,500.
Yearly turnover increased by Rs 67,50,000.
AIM OF THE PROJECT
To increase the valve production from 950 to 1050 valves per shift on Copy turning machine by reducing the cycle time required by ....etc

[:=Read Full Message Here=:]

good for open and see and if not no use seeing this page at all. time waste ....etc

[:=Read Full Message Here=:]

To get full information or details of production/maintenence/manufacturing please have a look on the pages

http://seminarsprojects.net/Thread-total-productive-maintenance-full-report

http://seminarsprojects.net/Thread-lean-production-full-report

http://seminarsprojects.net/Thread-lean-manufacturing-full-report

http://seminarsprojects.net/Thread-establishing-a-small-scale-industry-for-manufacturing-of-pipe-full-report

http://seminarsprojects.net/Thread-just-in-time-manufacturing

http://seminarsprojects.net/Thread-design-and-m ....etc

[:=Read Full Message Here=:]

Skills for improved productivity, employment growth and development

Introduction
The central aim of this report is to examine how, within a decent work perspective, countries can develop their skills base so as to increase both the quantity and the productivity of labour employed in the economy. Inadequate education and skills development keep economies trapped in a vicious circle of low education, low productivity and low income. The report therefore analyses how ....etc

[:=Read Full Message Here=:]

Defect Tracking for Improving Product Quality and Productivity DTS

ABSTRACT

Defect Tracking for Improving Product Quality and Productivity (DTS) is an automated system that can be useful to employees and the managers in any functional organization. DTS gives the facility to define the tasks in the organization and also allows the managers to track the defects spent by the employee for that particular task. A report generation facility is supported in DTS that al ....etc

[:=Read Full Message Here=:]

To get information about detergent powder from paddy husk refer the links below

http://seminarsprojects.net/Thread-detergent-powder-from-paddy-husk-with-pictures

http://mytopicstopic-pdf-for-preparation-of-detergent-powder-from-paddy-husk--113686 ....etc

[:=Read Full Message Here=:]

SUBMITTED BY-
ASHISH KUMAR
GAURAV MISHRA
SATYENDRA KUSHWAHA


SUMMER TRAINING REPORT ON COMMUTATOR AND BRUSH FAILURE
ELECTRIC LOCOMOTIVE SHED KANPUR
ABOUT THE ELECTRIC LOCO SHED KANPUR
The Electric loco shed, Kanpur was established during the year 1965 for homing 11 locomotives. This shed was commissioned primarily to meet the requirement of passenger and goods traffic over Indian railways. At present the shed has been expended suitably to home 176 loco motives for hauling, passenger and goods ....etc

[:=Read Full Message Here=:]

New methodological framework to improve productivity and ergonomics in assembly system design



1. Introduction and literature review
Generally, an assembly line could be dedicated to produce
a single product model or multiple product models, where many
items could be processed simultaneously in batches or handled in
lot sizes of one item for each product model. Three main kinds of
Assembly Line Balancing Problem (ALBP) are represented in literature
(Becker and Scholl, 2006 and Scholl, 1995):
Single ....etc

[:=Read Full Message Here=:]

informations about print brush including advantages and disadvantages and working principle ....etc

[:=Read Full Message Here=:]