What equation would I use to find the indexing time and processing time of a geneva mechanism given the RPM and number of slots? ....etc

[:=Read Full Message Here=:]

report paper cutter machine using geneva mechanism

A paper cutter (also referred to as paper trimmer, paper guillotine or simply a guillotine) is a tool often found in offices and classrooms, designed to cut a large set of paper at once with a straight edge.Paper cutters, similar to those of today, were patented in 1844 and 1852 by Guillaume Massiquot. They have been around since the late 1830s, when, in 1837, Thirault built a model with a fixed blade to a flat surface. Since the middle of the 19th century considerable improvements have been m ....etc

[:=Read Full Message Here=:]

i want to design geneva wheel . now i list down my reqiurements
1.i want to reduce the speed from 10000 rpm to 16 rpm.
2.i planned to create 5 slots
3.so in 4 stages i can reduce the speed from 10000 to 16 rpm
1st stage 10000/5 =2000
5 indicate the no of slots.
2nd stage 2000/5=400
3rd stage 400/5= 80
4th stage 80/5 =16 rpm
So in the 4th stage we get the required speed..

From this how can i find out the design of geneva mechanism

my intension to reduce the speed from 10000 to 16 rpm so if there any other methods ....etc

[:=Read Full Message Here=:]

To get full information or details of geneva mechanism please have a look on the pages

http://seminarsprojects.net/Thread-geneva-mechanism

http://seminarsprojects.net/Thread-geneva-mechanism-seminar-report

http://seminarsprojects.net/Thread-synthesis-of-conjugate-geneva-mechanisms-with-curved-slots

if you again feel trouble on geneva mechanism please reply in that page and ask specific fields in geneva mechanism ....etc

[:=Read Full Message Here=:]

ABSTRACT
Geneva drive or Maltese cross is a indexing mechanism that converts the continuous motion into intermittent motion. By means of this mechanism the rotary motion of the driver wheel is converting into intermittent rotary motion of sprocket. The film passed over the sprocket. Due to the intermittent motion, the film advanced frame by frame in front of lens for 1/24th second in frequency of 48 Hz.
CHAPTER 1
INTRODUCTION
Geneva mechanism is commonly ....etc

[:=Read Full Message Here=:]

geneva mechanism history pdf

Abstract

The Geneva mechanism is a timing device. According to Vector Mechanics for Engineers for Ferdinand P. Beer and E. Russell Johnston Jr., says, is used in many counting instruments and in other applications where an intermittent rotary motion is required. (945) Essentially, the Geneva mechanism consists of a rotating disk with a pin and another rotating disk with slots (usually four) into which the pin slides (see right).According to Brittanica.com, the Geneva mechanism was originally invented by a ....etc

[:=Read Full Message Here=:]

I have nee some details for geneva mechanism for my project. Plz help me ....etc

[:=Read Full Message Here=:]

manual paper cutting machine using geneva mechanism

To retain our goodwill as the leading trader, distributor and supplier, we are offering a qualitative range of Paper Cutters Machine. These are procured from the authentic vendors and tested properly by our experienced professionals at the time of procurement. Our offered machines are fully packed with advanced features that enhance their functionality and usability. By keeping in minds clients' different requirements, we offer the entire range in various technical specifications. This range ....etc

[:=Read Full Message Here=:]

Image result for geneva mechanism
The Geneva drive or Maltese cross is a gear mechanism that translates a continuous rotation into an intermittent rotary motion. The rotating drive wheel has a pin that reaches into a slot of the driven wheel advancing it by one step. ....etc

[:=Read Full Message Here=:]

To get full information or details of geneva mechanism please have a look on the pages

http://seminarsprojects.net/Thread-synthesis-of-conjugate-geneva-mechanisms-with-curved-slots

http://seminarsprojects.net/Thread-geneva-mechanism

if you again feel trouble on geneva mechanism please reply in that page and ask specific fields in geneva mechanism ....etc

[:=Read Full Message Here=:]