Presented by:
A.JohnBritto
C.Kanaga Raj
P.Senna Kesavan
A.VinothHEAT TRANSFER PERFORMANCE IN 3D INDUCED FINNED HEAT PIPE

ABSTRACT
3D induced finned steel-water heat pipe is carried out in this project.

All the main parameters that can significantly influence the heat transfer performance of heat pipe ,such as working temperature, heat flux, inclination angle, working fluid fill ratio (defined by the evaporation volume), have been e ....etc

[:=Read Full Message Here=:]

HI,
I WANT AN ONGOING RESEARCH DETAIL ABOUT MATRIX HEAT EXCHANGERS INCLUDING A POWER POINT PRSENTATION ON IT DESCRIBING
THERE WORKING,PRINCIPLE AND APPLICATIONS.
WITH REGARDS,
ANKITA JAIN
CHEMICAL ENGG. ....etc

[:=Read Full Message Here=:]

hi
you can refer this page to get the details on microscale regenerative heat exchangers

http://seminarsprojects.net/Thread-micro-scale-regenerative-heat-exchanger ....etc

[:=Read Full Message Here=:]

for more details on 'design and fabrication of pulse tube' , please follow the thread given below

http://seminarsprojects.net/Thread-design-and-fabrication-of-pulse-tube-refrigeration-system-full-report ....etc

[:=Read Full Message Here=:]

DESIGN AND FABRICATION OF PULSE TUBE REFRIGERATION SYSTEM

ABSTRACT
Cooling effect at one end of a hollow tube with a pulsating pressure in the inside gas, was first observed by Gifford and Longsworth in early sixties. This marks the inception of one of the most promising cryogenic refrigerators known as 'pulse tube refrigerator' (PTR). Cryogenics is the science of low temperature. Cryogenics refers to the entire phenomenon occurring below -150 C or 123K. Cryogenic engineering involves the design and development of system ....etc

[:=Read Full Message Here=:]

ABSTRACT

TOPIC : HELICALLY COILED HEAT EXCHANGERS

Process heat transfer with conventional shell and tube heat exchanger
is familiar to many engineers in many industries.Their use and performance is well-dominated. However, helically coiled heat exchangers, although they have been around for many years, are not well known.

Although various configurations are available, the basic and most common design consists of a series of stacked helically coiled tubes. The tube ends are connected to manifolds, which act as fluid entry and ....etc

[:=Read Full Message Here=:]

To get full information or details of micro channel heat exchangers please have a look on the pages

http://seminarsprojects.net/Thread-helically-coiled-heat-exchangers?pid=68940&mode=threaded

if you again feel trouble on micro channel heat exchangers please reply in that page and ask specific fields in micro channel heat exchangers ....etc

[:=Read Full Message Here=:]

Introduction

Thermal design of shell-and-tube heat exchangers (STHEs) is done by sophisticated computer software. However, a good understanding of the underlying principles of exchanger design is needed to use this software effectively.

This article explains the basics of exchanger thermal design, covering such topics as: STHE components; classification of STHEs according to construction and according to service; data needed for thermal design; tubeside design; shellside design, including tube layout, baffling, and shellside pres ....etc

[:=Read Full Message Here=:]

FAILURE ANALYSIS OF SHELL AND TUBE HEAT EXCHANGER
PROJECT REPORT
Submitted by
ALEX BABY ARUN M V JAIN RAJ .V VIJEESH VIJAYAN
ABSTRACT
Tar column recoiled E4509 in the phenol plant of HOCL found failed in service un like any other exchanger s in phenol manufacturing process .Each failure very high cost to HOCL in terms of production loss due to down time for maintence and due to the loss of therminol liquid to the process .the loss due to each failure found to be nearly RS 1.5 chore >the cost of tube bundle in SS-316 is ....etc

[:=Read Full Message Here=:]

High Conductance Heat Transfer Using Solar Heat Pipe Collector

presented by :-
MR. SHIVAJI D. YADAO1, MR. PRMENDRA J BANSOD2
Dr. D.Y.Patil Institute of Engg. & Tech.,Pune University, Pune,
Dr. D.Y.Patil Institute of Engg. & Tech.,Pune University, Pune,

abstract
In recent years it has become increasingly important to develop methods for efficient transport of thermal energy from one location to another. Moreover the advent of the space age has stimulated research for heat transfer devices which are ....etc

[:=Read Full Message Here=:]