A knuckle joint is a mechanical joint used to connect two rods which are under a tensile load, when there is a requirement of small amount of flexibility, or angular moment is necessary. There is always axial or linear line of action of load.
Knuckle Joint
A knuckle joint is used to connect two rods which are under the action of tensile loads. However, if the joint is guided, the rods may support a compressive load. A knuckle joint may be readily disconnected for adjustments or repairs.
Its use may be found in the page link of a cycle chain, ....etc

[:=Read Full Message Here=:]

ppt on selection of manufacturing method of cotter joint

COTTER JOINT

A cotter joint is used to connect rigidly two co-axial rods or bars which are subjected to axial tensile or compressive forces . It is a temporary fastening .A cotter joint is used to connect rigidly two co-axial rods or bars which are subjected to axial tensile or compressive forces. Here shaft is locked in place by a smaller pin that passes through the side of the lug and partly or completely through the shaft itself. This locking pin is named as cotter.
COTTER

A cotte ....etc

[:=Read Full Message Here=:]

Differentiate between sole proprietership ,partnership and joint stock company. ....etc

[:=Read Full Message Here=:]

ppt on manufacturing methods of knuckle joint

A knuckle joint is used to connect two rods which are under the action of tensile loads. However, if the joint is guided, the rods may support a compressive load. A knuckle joint may be readily disconnected for adjustments or repairs.

ABSTRACT
An improved method for manufacturing a steering knuckle and spindle unit for a heavy duty vehicle, such as a truck, including forming the spindle, separately forming the knuckle, and finally welding the knuckle and spindle together to form an integral unit. ....etc

[:=Read Full Message Here=:]

manufacturing of cotter joint ppt

A cotter joint is used to connect rigidly two co-axial rods or bars which are subjected to axial tensile or compressive forces . It is a temporary fastening .

COTTER

A cotter is a flat wedge shaped piece of rectangular cross section and its width is tapered (either on one side or on both sides) from one end to another for an easy adjustment.

APPLICATIONS OF COTTER

1. Connection of the piston rod with the cross heads
2. Joining o ....etc

[:=Read Full Message Here=:]

A hinge is a flat wedge-shaped steel piece of rectangular cross-section which is inserted through the rods at a high angle with respect to its axes. It is uniform in thickness, but narrows in width, usually on only one side. The taper is generally 1 in 30. When a special arrangement such as a set screw is provided to prevent the cotter from loosening, its taper may be as large as 1 in 7. The end of the cotter is narrow Facilitate hammering for fastening and disassembly. The key-joints are generally used to rigidly fix two rods that are subjecte ....etc

[:=Read Full Message Here=:]

Hi I am doing MCA final year..
My project is
Evaluating the vulnerability of network traffic using joint security and routing analysis
I need the presentation ,Source code,and screenshots for the execution..
I have the second review But i can't understand how to present my project clearly..
Please give me the clear explanation about the project and execution..
thank u.. ....etc

[:=Read Full Message Here=:]

ABSTRACT
A screw tube assembly is disclosed for use in a screw jack or the like. The screw tube assembly comprises a hollow tube member in one end of which is formed a recess so as to reduce the tube member wall thickness. Into this recess an annular bushing is inserted. A tip portion of the recessed tube wall is crimped over the received bushing outer end to lock the bushing in the tube against axial movement. A chordal portion of the bushing and overlying tube is then displaced radially outwardly to form an external tube assembly key and to ....etc

[:=Read Full Message Here=:]

why asa method is superior to zpf method ....etc

[:=Read Full Message Here=:]

Welcome to the world of intelligent speech processing!! Ordinary Automatic speech recognition systems use only audio information for speech processing. On the contrary, human speech is bimodal in nature. It consists of two main parts audio and video information. Audio information is the usual speech signal that we receive. Video signal consists of the lip movements and other visual information. The relevant data in a video signal is isolated and features are extracted from it. From a series of feature vectors, we make a set of higher set of se ....etc

[:=Read Full Message Here=:]