To get full information or details of manufacturing of turbo generators please have a look on the pages

http://seminarsprojects.net/Thread-manufacturing-and-testing-process-of-turbo-generators

http://seminarsprojects.net/Thread-insulation-and-manufacturing-process-of-500mw-turbo-generator-bars

http://seminarsprojects.net/Thread-components-of-turbo-generator

if you again feel trouble on manufacturing of turbo generators please reply in that page and ask specific fields in manufacturing of turbo generators ....etc

[:=Read Full Message Here=:]

ABSTRACT
BHEL is the largest engineering and manufacturing enterprise in India in the energy related infrastructure sector today which manufactures turbo generators
(2-pole and 4-pole) ranging up to 150 MHz
The manufacturing process of turbo generator is mainly divided into stator section and rotor section where stator frame, stator core, stator windings, end covers are received from the stator building section and rotor with rotor windings and rotor retaining rings is received from rotor section and assembled at ....etc

[:=Read Full Message Here=:]

3-16depends mainly on three things: the number of conductors in series per winding, the speed(alternator rpm) at which the magnetic field cuts the winding, and the strength of the magnetic field.Any of these three factors could be used to control the amount of voltage induced in the alternatorwindings.The number of windings, of course, is fixed when the alternator is manufactured. Also, if the outputfrequency is required to be of a constant value, then the speed of the rotating field must be held constant.This prevents the use of the alterna ....etc

[:=Read Full Message Here=:]

parallel operation of automotive alternators

The operation of connecting an alternator in parallel with another alternator or with common bus-bars is known as synchronizing. Generally, alternators are used in a power system where they are parallel with many other alternators. It means that the alternator is connected to a live system of constant and constant frequency.

Often the electrical system to which the alternator is connected, has already so many alternators and loads connected to it that no matter what power is delivered by the inc ....etc

[:=Read Full Message Here=:]

ABSTRACT
Over the last few years the interest in distributed generation and island operation of small production units has increased. Many of the existing such units are hydro power stations with induction generators. These are not initially constructed for island operation, but with some extra equipment this kind of operation is feasible. In this paper the behavior of two parallel-operated induction generators driven by hydro turbines are studied during load steps. The influence of a STATCOM based voltage regul ....etc

[:=Read Full Message Here=:]

to get information about the topic parallel operation of transformer related topic refer the page link bellow

http://seminarsprojects.net/Thread-%09analysis-of-parallel-operation-of-converters-with-interphase-transformer ....etc

[:=Read Full Message Here=:]

Abstract
This paper deals with a new isolated wind hydro
hybrid generation system employing one squirrel-cage induction
generator (SCIG) driven by a variable-speed wind turbine
and another SCIG driven by a constant-power hydro turbine
feeding three-phase four-wire local loads. The proposed system
utilizes two back-to-back-connected pulsewidth modulationcontrolled
insulated-gate-bipolar-transistor-based voltage-source
converters (VSCs) with a battery energy storage system at their
dc link. The main objectives of the control algo ....etc

[:=Read Full Message Here=:]

Wind Electric Generators and Control


Power Electronic Control

In a system incorporating a power electronic interface between the generator and the load (or the grid), the electrical power delivered by the generator to the load can be dynamically controlled. The instantaneous difference between the mechanical power and the electrical power changes the rotor speed following the equation

where J is the polar moment of inertia of the rotor, is the angular speed of the rotor ....etc

[:=Read Full Message Here=:]

plz provide me total details to finish this project..
i need a ppt and a brief description.. ....etc

[:=Read Full Message Here=:]

hi friends i m abhishek kumar.aokdslajdkdjdjaskdkzs adfd f aa f f s sa ff pass,dkksk ....etc

[:=Read Full Message Here=:]