corrosion
The process of decay of metal by environmental attack is called corrosion.
The basic reason for this attack is most of the metals (except Pt, Au, Ag) exist in nature in the form of their ores as oxides, chlorides, silicates, carbonates etc.,
Metals have the natural tendency to go back to their combined states, as a result when metal is exposed environmental conditions forms stable compounds of metals, known as corrosion.
The process of corrosion is reverse of metal extraction.
Effects of the cor ....etc

[:=Read Full Message Here=:]

[email protected]
in needof this topic very much.plz do help.. ....etc

[:=Read Full Message Here=:]

Corrosion of reinforcements has been one of the major challenges that the civil engineers have been facing. Corrosion leads to the formation of rust which results in the spalling of concrete which in turn leads to the exposure of rebars to the aggressive environment. This will accelerate the ill effects and ultimately leads to the break down of the structure. Corrosion mainly occurs in areas of aggressive environment such as coastal regions. It is very important that corrosion of reinforcement must be prevented in order to have a durable struct ....etc

[:=Read Full Message Here=:]

Sir ,
I am presenting a seminar on Remote corrosion monitoring Systems. As a part of it i would like to know the approximate cost of the following instruments.

Smart pebbles
Embedded Corrosion monitoring sensor
Monitoring cables
Time domain reflectometry
Corrosion penetration monitoring system

Can anyone please help me ....etc

[:=Read Full Message Here=:]

to get information about the topic get full seminar report on corrosion resistant gear box full report refer the page link bellow

http://seminarsprojects.net/Thread-properties-of-gear-material-and-their-advantages?pid=72852&mode=threaded ....etc

[:=Read Full Message Here=:]

literature review of control of corrosion on underwater piles

ABSTRACT

Piles are structures used to transfer loads from superstructure to the sub surface strata. When the subsurface stratum is water based or if we deal with a hydraulic structure, the piles are to be driven into water and under water strata. Piles used in underwater structures are often subjected to corrosion. There is no absolute way to eliminate all corrosion; but corrosion protection measures are employed to control the effect of corrosion. Corrosion protection can be in ....etc

[:=Read Full Message Here=:]

The cost of Corrosion in India is currently estimated at about Rs. 24,000 Cr/ year.
Although corrosion could be said to be natures method of recycling, or of returning of a
metal to its lowest energy form, it is an insidious enemy that destroys our cars / plumbing
systems / buildings / bridges / engines / factories etc. Avoiding detrimental corrosion
requires interdisciplinary approach by the designer. The approach paper is written from
various resources keeping the same in mind. This paper explains the process of
environmental attack on ....etc

[:=Read Full Message Here=:]

Abstract

Civil engineers are now-a-days being offered a variety of reinforcing steels to resist corrosion of steel in concrete. Two in particular, CRS and MMFX , will be discussed in this write-up However, the author stresses that reinforced concrete construction professionals need to refocus their attention on concrete, the material they know best, rather than on the metallurgical mysteries expounded by specialists from another discipline. After all, as every civil engineer worth his salt knows, concrete is the first line of defence in th ....etc

[:=Read Full Message Here=:]

ABSTRACT

Detection of corrosion damage in aircraft wing skin structures is an ongoing NDT challenge. Ultrasonic methods are known and well-accepted techniques, which are relatively simple to carry out in terms of setup, probes and instrumentation and operator training. However, with conventional inspection from the top surface using a transducer at normal incidence (0o to the normal to the surface) producing a visual picture in the form of a C-scan, it is very tie consuming to point-by-point inspects large aircraft wing skin areas. I ....etc

[:=Read Full Message Here=:]

Abstract
Corrosion is one of the serious problem affecting airforce and other aviation industries. It affects the aircraft on its wings, surface, between joints and fasteners. The presences of corrosion underneath the paints of surface and between joints are not easy to be detected. The unnoticed presence of corrosion may cause the aircraft to crash leading to human and money loses.

To detect the corrosion present on the metal surface, various methods and tests are used. These tests conducted should be such that it does not destroy or disassem ....etc

[:=Read Full Message Here=:]