Determination of Optimum Process Parameters during turning of AISI 304



Introduction and literature survey

In machining process, Surface finish is one of the most significant technical requirements of the customer. A reasonably good surface finish is desired to improve the tribological properties, fatigue strength, corrosion resistance and aesthetic appeal of the product. Nowadays, manufacturing industries specially concerned to dimensional accuracy and surface finish. In order to obtain optimal cutting pa ....etc

[:=Read Full Message Here=:]

The turning radius of a vehicle is the radius of the smallest circular turn (i.e. U-turn) that the vehicle is capable of making. The term turning radius is a technical term that has become popular automotive jargon. In the jargon sense, it is commonly used to mean the full diameter of the smallest circle, but in technical usage the turning radius still is used to denote the radius. The less ambiguous term turning circle avoids the mistaken jargon use of the word 'radius' . As an example, Motor Trend refers to a curb-to-curb turning circle of a ....etc

[:=Read Full Message Here=:]

synopsis for optimising the machining parameters of alloy steel
synopsis for optimising the machining parameters of alloy steel ....etc

[:=Read Full Message Here=:]

PROJECT GUIDE :
Dr.K.RAMANATHAN

Presented by:
K.KARTHIKEYAN




Abstract

Titanium nitride (TiN) is an extremely hard ceramic material, often used as a coating on titanium alloys, steel, carbide, and aluminium components to improve the substrate's surface properties.

Applied as a thin coating, TiN is used to harden and protect cutting and sliding surfaces, for decorative purposes (due to its gold appearance), and as a non-toxic exterior for medical implants.

TiN coating is for edge retention and corrosion r ....etc

[:=Read Full Message Here=:]

Abrasive Jet Machine

Introduction
Abrasive jet machining (AJM) is a non-traditional machining
process that can machine material without generating heat and
shock.
Abrasive jet machining (AJM) is commonly used for Cutting,
Cleaning, Drilling and Etching operation

Mechanism of AJM

Fine particles are accelerated in
gas stream .

The particles are directed towards
the focus of machining.

As the particle impacts the surface,
it causes a small fractu ....etc

[:=Read Full Message Here=:]

to get information about the topic cutting parameters of turning full report ppt and related topic rfer the page link bellow

http://seminarsprojects.net/Thread-optimization-of-machining-parameters-in-cnc-turning-of-martensitic-stainless-steel

http://seminarsprojects.net/Thread-investigation-of-cutting-parameters-of-surface-roughness-for-a-non-ferrous-material

http://seminarsprojects.net/Thread-cutting-parameters-optimization-for-the-wire-edm-process-using-continuous-ants-colo

http://seminarsprojects.net/Thread-optimization-of-mach ....etc

[:=Read Full Message Here=:]

to get information about the topic cutting parameters using taguchi method full report ppt and related topic refer the page link bellow

http://seminarsprojects.net/Thread-cutting-parameters-optimization-for-the-wire-edm-process-using-continuous-ants-colo ....etc

[:=Read Full Message Here=:]

ABSTRACT
Despite all the attempts of modern information technology to supplant paper by sophisticated electronic devices, paper is still omnipresent in virtually any office environment. Today, paper and computer are coexisting side by side without interacting with each other, both having their specific advantages. This seminar presents a concept for bridging the gap between computer and paper by combining the advantages of both electronic and paper world, the ease of use provid ....etc

[:=Read Full Message Here=:]

DESIGN AND FABRICATION OF GRINDING
ATTACHMENT FOR LATHE MACHINE TOOL

ABSTRACT
Grinding operation is performed to obtain a fine surface finish after performing turning operation on lathe
machine for cylindrical jobs. This is done to obtain required dimensions of part to be used in any assembly.
Thus to perform these two operations on same machine the attachment is designed. To verify the design the
attachment is fabricated.
This work describes an attempt to decrease the time in loading and unloading of workpeice with desired surface
fi ....etc

[:=Read Full Message Here=:]

to get information about the topic cutting parameters in cnc turning using full factorial method related topic rfer the page link bellow

http://seminarsprojects.net/Thread-optimization-of-machining-parameters-in-cnc-turning-of-martensitic-stainless-steel

http://seminarsprojects.net/Thread-investigation-of-cutting-parameters-of-surface-roughness-for-a-non-ferrous-material

http://seminarsprojects.net/Thread-cutting-parameters-optimization-for-the-wire-edm-process-using-continuous-ants-colo

http://seminarsprojects.net/Thread-optimization-of ....etc

[:=Read Full Message Here=:]