Hi I am satish need this document please hep me.... ....etc

[:=Read Full Message Here=:]

To get information about the topic involuntary train collision prevention system full report ppt and related topic refer the page link below

Abstract

Now a day we know that train collision may occur due to many reasons. This project is aimed to avoid
the train collision by giving an alert system to the driver.. In this project we are going to prevent the train
collision using MIWI communication. The embedded technology is used in this project.

INTRODUCTION

In this project we are going to prevent the train
collisio ....etc

[:=Read Full Message Here=:]

Abstract

In this Prevention system is to avoid the accident automatically RF Communication is used for Main and Sub Transmission data transmission.

Objectives:

This project has 2 modules. One is RF and Control Unit by both Main and sub main Unit. The second module Auto tracking by display and Control Unit.

1) When we start the train which is from current Station that is called Main Train.
2) Which is coming from station i.e. Sub main Train.
3) When we start the train from station automatically will identify the submain1 or 2 or etc.
4) This ....etc

[:=Read Full Message Here=:]

to get information about the topic rf that used in train collision prevention related topic refer the page link bellow

http://seminarsprojects.net/Thread-acd-anti-collision-device-full-report ....etc

[:=Read Full Message Here=:]

we are looking for involuntary train collision prevention document ....etc

[:=Read Full Message Here=:]

I WANT THIS TO DOWN LOAD.BECAUSE THIS PROJECT IS RELATED WITH MY FIELD AND ALSO I AM INTERESTING TO DO MY PROJECTS ON THIS. ....etc

[:=Read Full Message Here=:]

Seminar on A Prevention to Train Accident



INTRODUCTION

Some times train driver may become help less in stopping the train in short distance. When sudden brakes are applied (air brake) due to large number of bogies they may collide with each other or derail from railway track or may climb one over another which leads to lot of damage. To reduce damage and to give stability to the bogies electromagnetic concept is used. And to avoid train accidents due to floods, sensors are used. Also by the continuity ....etc

[:=Read Full Message Here=:]

Challenges and Recent Advances in QoS Provisioning,
Signaling, Routing and MAC protocols for MANETs

Shivanajay Marwaha Jadwiga Indulska Marius Portmann
School of ITEE, University of Queensland and NICTA Queensland Research Laboratory
Brisbane, Australia



ABSTRACT
Mobile Ad hoc Networks (MANET), which comprise of
mobile nodes connected wirelessly, are emerging as a very
important technology for future generation of wireless
networking. MANETs are being used in numerous
application domains from ....etc

[:=Read Full Message Here=:]

This work is concentrated on predicting the major cause of railway accidents that is collision on the same track.
The primary goal of this anti-collision system is to identify collision points and to report these error cases to
main control room, nearby station as well as grid control stations. So that if any collision likely to occurs then
this system will help to avoid such conditions by giving an alarm to concern units. Implementation of an
efficient Zig-Bee based Train Anti-Collision for railways is being proposed in this paper. A safe ....etc

[:=Read Full Message Here=:]

hello everybody, i am ram prawesh kumar, student of final year of electronics & communication engneering.

i want complete circuit designing of Train Collision Prevention and Signaling using RF (means where is diode, transistor, resistor, capacitor, transformer, sensor, etc. are connected in bradbord to properly works for project of Train Collision Prevention and Signaling using RF).

if any one can help to make this project please mail me complete details on my email id - [email protected]

please any one help me
ram prawesh ....etc

[:=Read Full Message Here=:]