1) Combustion control using optical fiber.
can you pleases send report, material & presentation on the above topic as that one is from this following references
SAE 881638
SAE 902138
SAE 902126

1. Witze, P.O., Hall, M.J., Wallace, J.S..: Fiber-Optic Instrumented Spark Plug for Measuring Early Flame Development in Spark Ignition Engines, SAE 881638
2. Spicher, U., B cker, H.: Optical Fiber Technique as a Tool to Improve Combustion EfficiencySAE 902138
3. Spicher, U., B cker, H.: Correlation of Flame Propagation and In-Cylinder Pressur ....etc

[:=Read Full Message Here=:]

In-cylinder pressure measurements are the common tool
to analyze and to improve the combustion process of SI
engines. New engine concepts like direct injection SI
engine, dual-plug ignition system and four or five valve
engines require modern measurement techniques which
provide further information about the combustion process.
Optical fibre technique is more suitable to gain
more versatile data than conventional pressure transducers.
Many optical in-cylinder sensor techniques have been
already presented either to monitor flame propaga ....etc

[:=Read Full Message Here=:]

INTRODUCTION
Internal combustion (IC) engines are used in a variety of stationary applications ranging from power generation to inert gas production. Both spark ignition and compression ignition engines can be found. Depending on the application, stationary IC engines range in size from relatively small ( 50 hp) for agricultural irrigation purposes to thousands of horsepower for power generation. Often when used for power generation, several large engines will be used in parallel to meet the load requirements. A variety of fuels ....etc

[:=Read Full Message Here=:]

A80MCJ89 that the information are. very important to me use in a seminar topics

A80MCJ89 that the information are. very important to me use in a seminar topics ....etc

[:=Read Full Message Here=:]

To get full information or details of heat recovery system for internal combustion engine please have a look on the pages

http://seminarsprojects.net/Thread-improvement-of-thermal-efficiency-by-recovery-of-heat-from-ic-engine-exhaust-full-rep?pid=25693&mode=threaded

if you again feel trouble on heat recovery system for internal combustion engine please reply in that page and ask specific fields ....etc

[:=Read Full Message Here=:]

optical measurement technique has become increasingly common for the past few years. In particular, the technique of optical fibre is often used to detect the spread of the flames. With optical sensors ignition process can be studied with a temporal and spatial resolution. An optical sensor in the cylinder was developed and tested to analyze ignition of the mixture and the light emission of combustion gases. The sensor consists of eight optical sensors mounted in a conventional spark plug.

The results show a good correlation between the meas ....etc

[:=Read Full Message Here=:]

download ppt on ic engine with homogeneous combustion in a porous medium

Abstract
At present, the emissions of internal combustion engines can only be improved by catalytic treatments of the exhaust gases. Such treatments, however, result in high costs and relatively low conversion efficiency. This suggests that a new combustion technique should be developed to yield improved primary combustion processes inside the engine with drastically reduced exhaust gas emissions. In this paper,. We report on such a technique that is applicable to direc ....etc

[:=Read Full Message Here=:]

For more information about combustion control using optical fibre

http://seminarsprojects.net/Thread-combustion-control-using-optical-fiber

http://seminarsprojects.net/Thread-speed-control-of-stepper-motor-using-at89c51 ....etc

[:=Read Full Message Here=:]

INTRODUCTION
The Saab Combustion Control (SCC) system is a new engine control system developed to lower fuel consumption while radically reducing the exhaust emissions, but without impairing engine performance. By mixing a large proportion of exhaust gases into the combustion process, the fuel consumption can be reduced by up to 10 percent, at the same time lowering the exhaust emissions to a value below the American Ultra Low Emission Vehicle 2 (ULEV2) requirements that will come into force in the year 2005. Compared to today's Saab ....etc

[:=Read Full Message Here=:]

ABSTRACT
The Saab Combustion Control (SCC) System is a new engine control system developed to lower fuel consumption while radically reducing the exhaust emissions but without impairing engine performance. By mixing a large proportion of exhaust gases into the combustion process, the fuel consumption can be reduced by up to 10 percent, at the same time and also lowers the exhaust emissions. Compared to today s engines, this will almost halve the carbon monoxide and hydrocarbon emissions, and will cut the ....etc

[:=Read Full Message Here=:]