cost for gsm path planning for blind person using ultrasonic

Abstract

This paper describes the system architecture for a navigation tool for visually impaired persons. The major parts are: a multi-sensory system (comprising stereo vision, acoustic range finding and movement sensors), a mapper, a warning system and a tactile human-machine interface. The sensory parts are described in more detail, and the first experimental results are presented.

Objectives:

About 1% of the human population is visually impaired, and amongst them about 10% is ....etc

[:=Read Full Message Here=:]

Asalam-u-alaikum!
I want data on manufacturing of pressure vessels. can u help me and give me the ppt file regarding this. ....etc

[:=Read Full Message Here=:]

ABSTRACT

Transfer of information between CAD models and downstream manufacturing process planning software typically involves non-productive human interaction. Knowledge acquisition and the reapplication of manufacturing knowledge is a key aspect of automating manufacturing process selection. Many tools are process-centric and unsuited for selection of a best process in the context of existing concurrent engineering design tools. The aim of this paper is to introduce an implementation of tools in the ICAD computer system, required to suppor ....etc

[:=Read Full Message Here=:]

Analogy based Software Cost Estimation (Java)
IEE Transactions on Software Engineering, Vol. 32, No. 2, February 2006

Abstract:
Cost estimation is a vital task in most important software project decisions such as resource allocation and bidding. Analogy-based cost estimation is particularly transparent, as it relies on historical information from similar past projects, whereby similarities are determined by comparing the projects key attributes and features. However, one crucial aspect of the analogy-based method is not yet fully ....etc

[:=Read Full Message Here=:]

i want a project or report on planning and designing low cost school buildinfgs ....etc

[:=Read Full Message Here=:]

Semi-automated process planning and cost estimation of turned components based on CATIA V5 Machining



Introduction
This chapter describes the background, purpose and the scope of the thesis. It also
states the main tasks and the delimitations of this work.

1.1 Background
In an environment of increasing globalization, companies are facing greater
competition. This pushes them to constantly improve their competitiveness in order to
maintain their market position. Asid ....etc

[:=Read Full Message Here=:]

In this project, we can integrate the process of planning & executing the customer order with delivery. During the process we must interlink all proceses like Inventory at different levels, production planning, purchase planning, Invoicing, Accounting, MIS(Management information system) generation for Delivery, Finance, Quality, Cost etc. Eg. If an order is booked at Branch level, It should check all Inventory levels in Branch, Regional Ware House, central ware house & Fg at plant level & based on availability should release production order at ....etc

[:=Read Full Message Here=:]

green eld PON networks was deployed to minimize the costs. This technique uses an ef cient heuristic called the Recursive Association and Relocation Algorithm (RARA) to solve the optimization problem. This algorithm can significantly reduce the PON network deployment costs compared to an
intuitive random-cut sectoring approach. The method of cable conduit sharing is proposed to extend to RARA. The studies and analysis shows that there are saturating trends for the PON deployment costs. three system parameters are used viz. optical split r ....etc

[:=Read Full Message Here=:]

A hinge is a flat wedge-shaped steel piece of rectangular cross-section which is inserted through the rods at a high angle with respect to its axes. It is uniform in thickness, but narrows in width, usually on only one side. The taper is generally 1 in 30. When a special arrangement such as a set screw is provided to prevent the cotter from loosening, its taper may be as large as 1 in 7. The end of the cotter is narrow Facilitate hammering for fastening and disassembly. The key-joints are generally used to rigidly fix two rods that are subjecte ....etc

[:=Read Full Message Here=:]

i am a teaching faculty in an engineering institute. i need 'cost control and cost reduction technique' content in form of ppt to deliver to my student i the subject of Estimating costing and contracting in Mechanical engineering.

i will be registering with you now

Prof. G.D. Vaghela ....etc

[:=Read Full Message Here=:]