#define F_CPU 12000000UL
#define USART_BAUDRATE 9600 // Baud Rate value
#define BAUD_PRESCALE ((F_CPU / (USART_BAUDRATE * 16UL)) - 1)

#include
#include

#define LCD_DATA PORTA //LCD data port


void usart_init();
unsigned int usart_getch();

int main()
{
unsigned char value;
DDRA=0b00000011; // LCD_DATA port as output port
_delay_ms(50); // delay of 50 milli seconds
usart_init(); // initialization of USART
while(1)
{
value=usart_getch(); // Call a function to get data from serial port
if(value == '1') {PORTA = 0b00000001; _delay_ms(1000) ....etc

[:=Read Full Message Here=:]

program for automatic train track changer and gate opening using atmega16 ....etc

[:=Read Full Message Here=:]

to get information about the topic controlling ip spoofing through inter domain packet filters full report ppt and related topic refer the page link bellow
http://seminarsprojects.net/Thread-controlling-ip-spoofing-through-inter-domain-packet-filters--16299

http://seminarsprojects.net/Thread-controlling-ip-spoofing-through-inter-domain-packet-filter?pid=69162#pid69162

http://seminarsprojects.net/Thread-controlling-ip-spoofing-through-inter-domain-packet-filters?pid=47413

http://seminarsprojects.net/Thread-controlling-ip-spoofing-through-int ....etc

[:=Read Full Message Here=:]

Hi,
I'm doing a private project with an Atmega 16 related to Heating Control. One part is the speed control of a fan. I intend to use a MOC3043 together with a Triac. My problem is: how I have to control the MOC3043 input? With PWM/CTC? I assume that the control signal sent to the MOC have to be synchronized with the 230V AC voltage, to be able to trigger the Triac correctly, but how?

Hints how to solve are highly appreciated.

Best regards

Erwin ....etc

[:=Read Full Message Here=:]

i need hex file ready to burn on atmega16 based obstacle avoiding robot having two infrared sensors in front and two motors ! plz urgent ....etc

[:=Read Full Message Here=:]

I want seminar report on controlling ip spoofing through inter domain packet filters URGENTLY.. ....etc

[:=Read Full Message Here=:]

programming of atmega16 for traic

In this project, we will learn How to design a BT136 Triac based PC controlled home appliances system with AVR ATmega16 microcontroller Part-II. Here, we will use the PC keyboard as the input device to control the appliances i.e 2 bulbs and 2 fans and we will display the status of each appliance in the PC.

PC will send the control signal(ASCII value of pressed key value) to the ATmega16 microcontroller through its serial port. But current generation PCs and Laptops do not have serial port in them, so we will ....etc

[:=Read Full Message Here=:]

Please send me the project report on obstacle avoiding robot using ATmega16 ....etc

[:=Read Full Message Here=:]

can u help me with code for grid follower using avr atmega 16 using codevision platform ....etc

[:=Read Full Message Here=:]

This is my maze solving robot project which worked out pretty well. I have put up my whole project report that i submitted to my college but i have chucked out the exact code. if i get a good response and demans then i will surely give you all the exact working code of my project.If you are interested only to learn about the algorithm and not worried about the design pl skip to the section 5 of this text.

1 INTRODUCTION

Atonomous robots have wide reaching applications.From Bomb sniffing to finding humans in wreckage to home automation.Major p ....etc

[:=Read Full Message Here=:]