AIM
To conduct OC, SC and ZPF test on the three phase alternator and to predetermine the regulation of 3 phase alternator by EMF method, MMF method, & ZPF method also to verify by vector diagram.
APPARATUS REQUIRED
PRECAUTION
1. The motor field rheostat should be kept in the minimum resistance position.
2. The alternator field potential divider should be in the minimum voltage position.
3. Initially all switches are in open position.
PROCEDURE
A. OC.Test
1. Note down the name plate details ....etc

[:=Read Full Message Here=:]

i want to download some data on ''global voltage regulation'', so kindly help me out.
thank you ....etc

[:=Read Full Message Here=:]

thanks for u for giving me this opertunity,iam compulsary wins ....etc

[:=Read Full Message Here=:]

A New Induction Motor V/f Control Method Capable of High-Performance Regulation at Low Speeds
Abstract
A novel open-loop speed control method for induction motors that provides high output torque and nearly zero steady-state speed error at any frequency is presented. The control scheme is based on the popular constant volts per hertz (V/f) method using low-cost open-loop current sensors. Only stator current measurements are needed to compensate for both stator resistance drop and slip frequency. The scheme proposed fully compens ....etc

[:=Read Full Message Here=:]

Inverter compounding- uncompounded inverter- rectifier compounding- transmission characteristics with the rectifier and inverter compounding-
current regulation from the inverter side.

sir/mam,
i need the notes for the above topics with respect to HVDC transmission,
i searched for it, but i didn't get any information from the internet, so please guide me for my exams..
It ll be more be useful if i get the response at the earliest posible time, as i have to prepare for my exam tomorrow

my mail id: [email protected]

thank y ....etc

[:=Read Full Message Here=:]

THEORY:
The regulation of a 3-phase alternator may be predetermined by conducting the Open Circuit (OC) and the Sort Circuit (SC) tests. The methods employed for determination of regulation are EMF or synchronous impedance method, MMF or Ampere Turns method and the ZPF or Potier triangle method. In this experiment, the EMF and MMF methods are used. The OC and SC graphs are plotted from the two tests. The synchronous impedance is found from the OC test. The regulation is then determined at different power factors by ....etc

[:=Read Full Message Here=:]

AIM:
To predetermine the regulation of three phase alternator by Potier and ASA methods and also to draw the vector diagrams.
FORMULAE USED:
Percentage regulation = Eo Vrated x 100 (For both POTIER & ASA methods)
Vrated
PRECAUTION:
(i) The motor field rheostat should be kept in the minimum resistance position.
(ii) The Alternator field potential divider should be in the position of minimum potential.
(ii) Initially all switches are in open position.
PROCEDURE FOR BOTH POTIER AND ASA MET ....etc

[:=Read Full Message Here=:]

a novel night-time application of a photovoltaic (PV) solar power farm bidirectional inverter as a battery charger, is presented. It is shown that a combination of PV solar farm and storage batteries can be advantageous in a distribution system having wind farm in close vicinity to the solar farm. Under such a condition, the PV solar farm inverter can regulate the grid voltage (if allowed by the code) by charging/ discharging the batteries as well as provide better asset utilization and return on investments. The PV solar farm inverter is opera ....etc

[:=Read Full Message Here=:]

Formula for emf and mmf, similarities between emf and mmf and difference ....etc

[:=Read Full Message Here=:]

AIM
To conduct the slip test on three phase alternator and predetermination the regulation through vector diagrams
APPARATUS REQUIRED
PRECAUTION
1. The Motor field Rheostat should be kept in minimum resistance position.
2. The Alternator field should be kept open throughout the experiment.
3. The direction of rotation due to prime mover and due to the Alternator run as the motor should be same.
4. Initially all the switches are kept open
PROCEDURE
1. The name plate details of the motor an ....etc

[:=Read Full Message Here=:]