Gary Morphy
VARI-FORM

ABSTRACT
The need for lighter, stronger, more rigid vehicle structures will increasingly require complex hydroformed structural tubes to increase strength, and decrease weight, cost and part count. This effort will increase the use of high strength, low alloy (HSLA) steel, in place of SAE 1006/1008 or 1010 steel. Traditional hydroforming techniques require the higher elongation of the latter materials. An alternative tube hydroforming process has been developed to successfully use these, an ....etc

[:=Read Full Message Here=:]

INTRODUCTION

Before the 1950 s, ferromagnetic cores were the only type of random-access, nonvolatile memories available. A core memory is a regular array of tiny magnetic cores that can be magnetized in one of two opposite directions, making it possible to store binary data in the form of a magnetic field. The success of the core memory was due to a simple architecture that resulted in a relatively dense array of cells. This approach was emulated in the semiconductor memories of today (DRAM s, EEPROM s, and FRAM s). Ferromagnetic cores, ....etc

[:=Read Full Message Here=:]

ABSTRACT
Ferroelectric memory is a new type of semiconductor memory, which exhibit short programming time, low power consumption and nonvolatile memory, making highly suitable for application like contact less smart card, digital cameras which demands many memory write operations.
A ferroelectric memory technology consists of a complementary metal-oxide-semiconductor (CMOS) technology with added layers on top for ferroelectric capacitors. A ferroelectric memory cell has at least one ferroelectric capacitor ....etc

[:=Read Full Message Here=:]

Ferroelectric memory is type of semiconductor memory, which exhibit short programming time, low power consumption and nonvolatile memory, making highly suitable for application like contact less smart card, digital cameras which demands many memory write operations.
A ferroelectric memory technology consists of a complementary metal-oxide-semiconductor (CMOS) technology with added layers on top for ferroelectric capacitors. A ferroelectric memory cell has at least one ferroelectric capacitor to store the binary data, and one transistor that pr ....etc

[:=Read Full Message Here=:]

,
Ferroelectric RAM

abstract

Ferroelectric RAM (FeRAM or FRAM) is a random access memory similar in construction to DRAM but uses a ferroelectric layer instead of a dielectric layer to achieve non-volatility. FeRAM is one of a growing number of alternative non-volatile memory technologies that offer the same functionality as Flash memory. FeRAM advantages over Flash include: lower power usage, faster write performance and a much greater maximum number (exceeding 1016 for 3.3 V devices) of write-erase cy ....etc

[:=Read Full Message Here=:]

Zero-capacitor (Z-RAM) is a novel DRAM computer memory technology .Based on the floating body effect of silicon on insulator (SOI) process technology. Z-RAM has been licensed by Advanced Micro Devices for possible use in future microprocessors. This technology offers memory access speeds similar to the standard six-transistor SRAM cell used in cache memory but uses only a single transistor, therefore affording much higher packing densities.Z-RAM relies on the floating body effect, an artifact of the SOI process technology which places transisto ....etc

[:=Read Full Message Here=:]

Thyristor RAM ('T-RAM) is a new type of DRAM computer memory invented and developed by T-RAM Semiconductor, which departs from the usual designs of memory cells, combining the strengths of the DRAM and SRAM: high speed and high volume. This technology exploits the electrical property known as negative differential resistance and is called thin capacitively-coupled thyristor used to create memory cells capable of very high packing densities. This memory is highly scalable and already has a storage density that is several times higher than found ....etc

[:=Read Full Message Here=:]

Ferroelectric Random Access Memory
Abstract
Ferroelectric Random Access Memory Before the 1950 s, ferromagnetic cores were the only type of random-access, nonvolatile memories available. A core memory is a regular array of tiny magnetic cores that can be magnetized in one of two opposite directions, making it possible to store binary data in the form of a magnetic field. The success of the core memory was due to a simple architecture that resulted in a relatively dense array of cells. This approach was emulated in the semiconductor m ....etc

[:=Read Full Message Here=:]

A wind turbine is a device that converts the wind's kinetic energy into electrical power. The term appears to have been adopted from hydroelectric technology (rotary propeller). The technical description of a wind turbine is aerofoil-powered generator.

As a result of over a millennium of windmill development and modern engineering, today's wind turbines are manufactured in a wide range of vertical and horizontal axis types. The smallest turbines are used for applications such as battery charging for auxiliary power for boats or caravans or t ....etc

[:=Read Full Message Here=:]

Presented by:
Thomas Herpel
Christoph Lauer
Reinhard German
Johannes Salzberger
Multi-sensor Data Fusion in Automotive Applications

ABSTRACT
The application of environment sensor systems in modern often called intelligent cars is regarded as a promising instrument for increasing road traffic safety. Based on a context perception enabled by well-known technologies such as radar, laser or video, these cars are able to detect threats on the road, anticipate ....etc

[:=Read Full Message Here=:]